Cambium Networks

ePMP Force 200L

Name: ePMP Force 200L
Brand: Cambium Networks

Referencia: ePMP Force 200L

ePMP Force 200L: módulo de abonado de Cambium Networks. Especificaciones y documentación oficial para planificar tu proyecto con ECISEC.

Consulta disponibilidad y condiciones para Ecuador.

Soporte local Asesoría de ingeniería

CONOCE LOS DETALLES

Especificaciones
técnicas.

Referencia ePMP Force 200L.
Información del fabricante.

Especificaciones de ePMP Force 200L
Channel Spacing	Configurable on 5 MHz increments
Frequency Range	Wide Band Operation 4910–5970 MHz
Channel Width MHz	5 \| 10 \| 20 \| 40
ARQ	Yes
Nominal Receive Sensitivity (w/FEC) @200MHz Channel	MCS0 -88 dBm; MCS7 = -70 dBm
Nominal Receive Sensitivity (w/FEC) @40MHz Channel	MCS0 = -86 dBm; MCS7 = -68 dBm
Modulation Levels (Adaptive)	MCS0 (BPSK) to MCS7 (64QAM 5/6)
Quality of Service	Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority
Transmit Power Range	+3 to 28 dBm (combined, to regional EIRP limit) (1 dB interval)
Surge Suppression	1 Joule Integrated
Environmental	IP55
Temperature	-30°C to 55°C (-22°F to 122°F)
Weight	1.6 kg (3.5 lbs)
Wind Survival	200 km/h (124 mph)
Pole Diameter Range	2.5 - 7.5 cm (1.0 to 3.0 in)
Power Consumption	8 W Maximum, 5 W Typical
Input Voltage	30 V Passive PoE (14-30 V DC input)
Encryption	128-bit AES (CCMP mode)
FCC	Not Available in North America
Industry Canada	Not Available in North America
CE	DoC available on cambiumnetworks.com